Control

You have to activate SuperFrost in good time, depending on how much fresh food is to be frozen: about 6 hours before placing the food inside in case of small amounts and about 24 hours in advance in case of the maximum amount of food to be frozen.

Wrap produce and spread it out as far as possible. Do not allow produce to be frozen to touch produce that is already frozen to prevent the latter thawing.

You do not have to activate SuperFrost in the following cases:

-when placing frozen food in the freezer

-when freezing up to approx. 2 kg fresh food daily

Freezing with SuperFrost

uBriefly press the SuperFrost button Fig. 2 (12) once. w The SuperFrost symbol Fig. 2 (13) shines.

w The freezing temperature drops, the appliance operates with the maximum cooling capacity.

For a smaller quantity of produce to be frozen:

uwait approx. 6 h.

uAppliances with NoFrost: place wrapped produce in the top drawers.

uAppliances without NoFrost: place wrapped produce in the bottom drawers.

For the maximum quantity of produce to be frozen:

uwait approx. 24 h.

uAppliances with NoFrost: remove top drawers and place produce directly on the top shelves.

uAppliances without NoFrost: remove bottom drawer and place produce directly in the appliance so that it touches the base or sides.

SuperFrost is automatically deactivated. Depending on the quantity placed inside, after 30 h at the earliest, 65 h at the latest.

The SuperFrost symbol Fig. 2 (13) extinguishes once freezing is completed.

Place produce in the drawers and push the latter back in again.

The appliance continues to operate in the energy-saving,

normal mode.wwuw

5.6.5 Drawers

Note

The energy consumption increases and the cooling perform- ance decreases if there is insufficient ventilation.

For appliances with NoFrost:

u Leave the bottom drawer in the appliance!

u Always keep the air slits of the fan free at the rear wall!

uTo store frozen food directly on the shelves: pull the drawer forwards and lift it out.

5.6.6 Shelves

u To remove the shelf: lift up at the front and pull out.

u To put the shelf back: simply push in as far as it will go.

5.6.7 VarioSpace

 

Apart from being able to

 

remove the drawers, you can

 

also remove the

shelves,

 

creating space for large items

 

of frozen food. Poultry, meat,

 

large pieces of game and high

 

bakery products can be frozen

 

in one piece and prepared.

 

u The maximum

load of

 

frozen food for the drawers

*

is 25 kg each and for the

shelves 35 kg each.

 

5.6.8 Information system*

 

Fig. 12

(1) Ready meals, ice cream

(4) Sausage, bread

(2) Pork, fish

 

(5) Game, mushrooms

(3) Fruit, vegetables

 

(6) Poultry, beef / veal

The figures indicate the storage time in months for several types of frozen food in each case. Storage times given are guide times.

5.6.9 Cold storage accumulators

The cold storage accumulators prevent the temperature from rising too fast in the event of power failure.

Using cold storage accumulators*

u Place the frozen cold storage accumulators on the frozen food in the upper front area of the freezer compartment.

Using cold storage accumulators*

u Freeze and store the cold storage accumu- lators in the ceiling of the freezer compart- ment.

With the top drawer removed:

u to insert cold storage accu-

mulators: slide cold storage accumulator into the top back of the freezer compartment ceiling and snap into place at the front.

10

* Depending on model and options

Page 9 Page 11
Page 10
Image 10
Liebherr 131113 7085462 - 01 operating instructions Drawers, VarioSpace, Information system, Cold storage accumulators
Page 9 Page 11

131113 7085462 - 01 specifications

The Liebherr 131113 7085462 - 01 is a highly engineered component that exemplifies the company's commitment to quality and innovation in the field of heavy machinery and construction equipment. This part is primarily utilized in Liebherr’s array of mobile and crawler cranes, serving as a vital element in the operation of these formidable machines.

One of the standout features of the Liebherr 131113 7085462 - 01 is its robust construction. Built to withstand the rigorous demands of lifting heavy loads, it is manufactured using high-grade materials that ensure durability and resistance to wear and tear. The component is designed to deliver exceptional performance in various conditions, whether on rugged job sites or in urban environments.

In terms of technology, the Liebherr 131113 7085462 - 01 incorporates advanced engineering principles that enhance operational efficiency. It operates seamlessly with Liebherr's sophisticated hydraulic systems, providing smooth and precise control during lifting operations. The integration of technology is evident in the component’s ability to respond quickly to operational commands, allowing for greater flexibility and precision when maneuvering heavy materials.

Furthermore, the Liebherr 131113 7085462 - 01 features innovative safety mechanisms. Designed with operator safety in mind, it includes features that reduce the risks associated with heavy lifting. These safety technologies are critical in preventing accidents on construction sites, ensuring that operations can proceed smoothly and securely.

Another key characteristic is the ease of maintenance associated with the Liebherr 131113 7085462 - 01. The design allows for straightforward inspections and servicing, ensuring that the component remains in optimal working condition. This not only extends the lifespan of the part but also enhances the overall reliability of the cranes it is utilized in.

Overall, the Liebherr 131113 7085462 - 01 embodies the essence of Liebherr's engineering expertise. Its combination of robust construction, advanced technology, and safety features makes it an invaluable component for professionals in the construction and heavy lifting sectors, solidifying Liebherr's reputation as a leader in the industry. Whether you are lifting steel beams or positioning heavy equipment, this component ensures that operations are carried out efficiently and safely.
Top Page Image Contents