Control

You can adjust the temperature slightly colder or warmer. The temperature can be adjusted from b1 (coldest temperature) to

b9 (warmest temperature). The presetting is b5. With the b1 to b4 values, the temperature can drop below 0 ° C and therefore food can freeze slightly as a result.

u To activate the setting mode: press the SuperFrost button Fig. 2 (12) for about 5 s.

w The menu symbol Fig. 2 (16) shines. w c flashes on the display.

uPress the Up setting button, freezer compartment Fig. 2 (10) the number of times required for b to flash in the display.

uTo confirm: briefly press the SuperFrost button.

uTo set the temperature higher: press Up button, freezer compartment Fig. 2 (10).

uTo set the temperature lower: press Down button, freezer compartment Fig. 2 (11).

uTo confirm: press SuperFrost button.

The temperature slowly adjusts to the new value.w

u To deactivate the setting mode: press On/Off button, freezer compartment Fig. 2 (8).

-or-

u Wait for 5 minutes.

w The temperature is indicated again in the temperature display.

5.5.7 Drawers with cushioners

Fig. 9

uPull out the drawer, lift it at the back and draw it forwards for removal.

uPush the rails in again!

Fig. 10

uPush the rails in.

uAttach the drawer and push it in until it engages audibly at the back.

5.5.8 Humidity control plate

Fig. 11

u To remove the humidity control plate: Having removed the drawers, carefully draw the plate forwards and lower it for removal.

u To insert the humidity control plate: Insert the cover mould- ings of the plate into the rear holder Fig. 11 (1) from under- neath and engage them in the holder Fig. 11 (2) at the front.

5.6 Freezer compartment

You can store frozen food, make ice cubes and freeze fresh food in the freezer compartment.

5.6.1 Freezing food

The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see Appliance at a glance) under “Freezing capacity ... kg/24h”.

The maximum load of frozen food for the drawers is 25 kg each and for the shelves 35 kg each.

A vacuum is generated after the door is closed. After closing the door, wait for about 1 minute and then it opens more easily.

CAUTION

Risk of injury due to broken glass!

Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks.

u Do not freeze bottles and cans containing drinks!

In order that the food is rapidly frozen through to the core, do not exceed the following quantities per pack:

- Fruit, vegetables up to 1 kg - Meat up to 2.5 kg

u Pack the food in portions in freezer bags, reusable plastic, metal or aluminium containers.

5.6.2 Thawing food

- in the refrigerator compartment - at room temperature

- in a microwave oven

- in a conventional or fan oven

u Remove only as much food as is required. Use thawed food as quickly as possible.

u Food once thawed should be re-frozen only in exceptional cases.

5.6.3Setting the temperature in the freezer compartment

The appliance is pre-set for normal operation.

The temperature can be set from -15 °C to -26 °C, the recom- mended temperature is -18 °C.

u To set the temperature higher: press Up button, freezer compartment Fig. 2 (10).

u To set the temperature lower: press Down button, freezer compartment Fig. 2 (11).

w When the button is pressed the first time, the previous value is indicated in the temperature display of the freezer compartment.

u To change the temperature in 1 °C steps: briefly press the button.

-or-

u To change the temperature continuously: hold down the button.

wThe value is displayed flashing during the setting operation.

wThe actual temperature is displayed approx. 5 seconds after the button is last pressed. The temperature gradually adjusts to the new value.

5.6.4 SuperFrost

With this function you can freeze fresh food quickly through to the core. The appliance operates with maximum refrigeration. The noise of the refrigeration unit may be temporarily louder as a result.

In addition, frozen food already in storage is given a “cold reserve”. The food stays frozen longer as a result when you defrost the appliance.*

The maximum amount of fresh food which can be frozen in 24 h is indicated on the type plate under “freezing capacity ... kg/ 24h”. This amount varies according to the model and climate rating.

* Depending on model and options

9

Page 9
Image 9
Liebherr 131113 7085462 - 01 operating instructions Freezer compartment

131113 7085462 - 01 specifications

The Liebherr 131113 7085462 - 01 is a highly engineered component that exemplifies the company's commitment to quality and innovation in the field of heavy machinery and construction equipment. This part is primarily utilized in Liebherr’s array of mobile and crawler cranes, serving as a vital element in the operation of these formidable machines.

One of the standout features of the Liebherr 131113 7085462 - 01 is its robust construction. Built to withstand the rigorous demands of lifting heavy loads, it is manufactured using high-grade materials that ensure durability and resistance to wear and tear. The component is designed to deliver exceptional performance in various conditions, whether on rugged job sites or in urban environments.

In terms of technology, the Liebherr 131113 7085462 - 01 incorporates advanced engineering principles that enhance operational efficiency. It operates seamlessly with Liebherr's sophisticated hydraulic systems, providing smooth and precise control during lifting operations. The integration of technology is evident in the component’s ability to respond quickly to operational commands, allowing for greater flexibility and precision when maneuvering heavy materials.

Furthermore, the Liebherr 131113 7085462 - 01 features innovative safety mechanisms. Designed with operator safety in mind, it includes features that reduce the risks associated with heavy lifting. These safety technologies are critical in preventing accidents on construction sites, ensuring that operations can proceed smoothly and securely.

Another key characteristic is the ease of maintenance associated with the Liebherr 131113 7085462 - 01. The design allows for straightforward inspections and servicing, ensuring that the component remains in optimal working condition. This not only extends the lifespan of the part but also enhances the overall reliability of the cranes it is utilized in.

Overall, the Liebherr 131113 7085462 - 01 embodies the essence of Liebherr's engineering expertise. Its combination of robust construction, advanced technology, and safety features makes it an invaluable component for professionals in the construction and heavy lifting sectors, solidifying Liebherr's reputation as a leader in the industry. Whether you are lifting steel beams or positioning heavy equipment, this component ensures that operations are carried out efficiently and safely.