Water filter
Before switching on the appliance, install the water filter provided in the interior rear wall of the refrigerator compartment.
This ensures good ice cube quality and keeps the water circuit free of solids such as sand.
Water filter
location 
Replace the filter when the waterdrop symbol appears in the temperature display.
Filters can be obtained from your dealer. The drop symbol must be cancelled after the filter has been changed. For detailed instructions see section entitled "Setup mode".
Caution!
To avoid the risk of bacteria growth, the water filter must be changed when the waterdrop symbol appears on the display!
It is not necessary to switch off the water supply when removing or installing the water filter.
Saving energy
- Always ensure good ventilation. Do not cover ventilation open- ings or grille.
- Always keep fan louvres clear.
- Do not place appliance in areas of direct sunlight or next to a stove, heater or similar object.
- The energy consumption depends on the installation conditions, e.g. the ambient temperature.
- Keep the time the appliance is open to a minimum. - Store food logically.
- Ensure that all food is well packed and covered for storage. This will prevent frost from forming.
- First cool warm food to room temperature before storing it. - Defrost frozen food in the refrigerator.
- If there is a thick layer of frost in the appliance: defrost the appli- ance.
- Empty and switch off refrigerating unit for longer vacation periods. - Use the vacation function for longer vacation periods. Accumulated dust increases the energy consumption:
- Once a year, dust the refrigerating unit together with the metal grille of the heat exchanger at the back of the appliance.
Installing the water filter
1. Remove the cover of the filter socket.
2. Insert the filter and turn it 90° clockwise.
Removing the water filter
3. Turn the filter 90° anticlockwise and remove.
14
