Liebherr BFI1051, BF1051 Reversing Door Hinges, A delight in freshness, Figure, LBR034

REVERSING DOOR HINGES

Only install the refrigerator/freezer in a stable kitchen cabinet that has been properly aligned.

- Mount and fix the handles, depending on your model and choice.

Figure 16: Installation with Ventilation Grille Set:

1. Screw the installation frame at the top (1) onto the appliance (2).

2. Place the ventilation grille (3) on this, align it in the center and secure at the front from underneath.

3. Slide brackets (4) onto the side installation frames (5) from above and below.

4. Using the frame (5), screw the brackets onto the side wall*.

5. Slide the side installation frames (5) upwards until they are in contact with the underside of the ventilation grille.

6. Secure the side frames with the adhesive section (7) to prevent them from sliding down. Remove the protective film and affix the adhesive sections over the upper brackets on the handle and hinge sides.

LBR034

Figure 16

A delight in freshness

18 BFI/BF1051 / BGEN/es 2956