BLOCKING FOR SAFETY

Figure 21: Secure the refrigerator in place so it does not tip forward when the fully stocked door is opened.

2.Measure the distance from the floor to the upper edge of the unit.

3.Locate and mark two wall studs (1) against the wall where the refrigerator will be located. The space between the unit top and the bottom

of the brackets must not be more than 1/4" (0.635 cm).

4.Make sure the screws (2) extend a minimum of 1" (2.54 cm) into each of the wall studs.

5.Make sure the anti-tip brackets (3) extend at least 3" (7.62 cm) over the unit and are securely in place.

IMPORTANT

The anti-tip brackets can be installed in either direction or closer together. Always position the anti-tip brackets as wide apart as possible, but make sure they are anchored to two studs.

6.Using the adjustable roller base, raise the unit until it makes contact with the brackets. Make sure the front levelers are firmly on the floor to prevent appliance from tipping forward.

IMPORTANT

If your unit is positioned in between the wall studs, a board can be secured to the wall. Make sure the board is secured to the studs with screws that will penetrate into the studs a minimum of 1" (2.54 cm). The board should be a minimum of 1" x 6" (2.54 cm x 15.24 cm) and long enough to secure both ends to the wall studs.

3

1

2

Figure 21

A delight in freshness

22

BFI/BF1051 / BGEN/es 2956

Page 23 Page 25
Page 24
Image 24
Liebherr BFI1051, BF1051 installation instructions Blocking for Safety
Page 23 Page 25

BF1051, BFI1051 specifications

The Liebherr BFI 1051 and BF 1051 refrigerators stand out in the realm of high-efficiency, modern refrigeration solutions. Crafted with precision engineering, these models are designed to meet the diverse needs of both commercial and residential kitchens, offering optimal storage conditions for food and beverages.

One of the most significant features of the BFI 1051 and BF 1051 is their impressive energy efficiency. Equipped with cutting-edge cooling technology, these units utilize advanced refrigeration elements that deliver a high cooling capacity while consuming minimal electricity. This not only helps in reducing energy costs but also contributes to a more sustainable environment.

The exterior design of the BFI 1051 and BF 1051 reflects a blend of elegance and functionality. With their sleek and modern lines, these refrigerators easily integrate into various kitchen styles, enhancing the overall aesthetic. The robust stainless-steel construction further ensures durability and easy maintenance, making them suitable for heavy-duty use.

Inside, the BFI 1051 and BF 1051 feature intelligently designed storage solutions. The adjustable shelves allow for maximum versatility, enabling users to customize the refrigerator's interior according to their storage needs. Additional features such as transparent drawers and door bins facilitate easy organization and quick access to essential items.

Both models incorporate advanced temperature control technologies that ensure consistent cooling throughout the interior. The dynamic cooling system keeps temperatures uniform, preventing hotspots and ensuring food safety. Furthermore, the integral LED lighting illuminates the contents, making it easy to find items even in low light conditions.

Safety and hygiene are paramount in the design of the BFI 1051 and BF 1051. The units are equipped with advanced frost-free technology, minimizing ice buildup and the need for manual defrosting. This not only simplifies maintenance but also promotes an environment conducive to preserving food freshness.

In conclusion, the Liebherr BFI 1051 and BF 1051 are exemplary models of modern refrigeration technology. With their blend of energy efficiency, durability, and advanced features, these refrigerators are perfect for anyone looking to enhance their kitchen's functionality and design. Whether for commercial or residential use, Liebherr's commitment to quality and innovation is evident in these exceptional products.
Top Page Image Contents