INSTALLATION
11.Extend the
Figure 30
12.Attach the retaining clamp to the ball housing of the
To avoid injury or damage, do not forget to secure the
Figure 31
Mounting the ventilation grille -
Figure 32, 33
1.Pull out the bottom freezer drawer.
2.Remove the blue protection film from the dust filter provided and insert the filter into its opening in the toe kick area as shown in Figure 32.
Figure 32
3. Mount the ventilation grille as shown in Figure 33.
IMPORTANT
Only use the ventilation grille provided with the appliance. This grille is required for proper operation of the appliance.
The ventilation opening must not be covered with a cabinet base.
Failure to use the supplied grille can result in product failure and will void the warranty.
Figure 33
18
