INSTALLATION
Leveling the Refrigerator - Figure 14
1.The height can be adjusted in front by twisting the leveling feet 1.
2.Twist the adjusting bolt 2 to set up the back of the refrigerator.
3.Rotate leveling feet 1until firmly in place against the floor.
To prevent the appliance from tipping forward the leveling feet 1(Figure 14) must have contact with the floor.
4.Align refrigerator with sides of kitchen cabinets by adjusting leveling feet and the supports.
Cover plate for 84" cabinets
In the panel set for 84" cabinets the plate provided can be used to cover the space between aplliance housing and cabinet top. Screw the cover plate on the appliance housing using two screws M5 x 15 (Figure 15).
Figure 15
Fasten the appliance in the recess
Fasten the appliance in the recess through the upper and lower hinges of the refrigerator doors. Use 2 screws for each hinge (Figure 16).
5 mm socket
27 mm wrench
Figure 14
screws 4 x 16 mm
Figure 16
10