Liebherr RBI 1400, RB 1400 Operation, Turning the appliance on and off, Setting the temperature

OPERATION

6

A1

SuperCool

2 1 3 4 5

You are advised to clean the appliance before switching it on for the first time (see "Cleaning").

Turning the appliance on and off

WTurning on: Press the on/off button 3 so that the temperature display lights up or flashes.

-The lighting will light up when the door is open. W Turning off: Press the on/off button for approx.

two seconds so that the temperature display goes out.

Setting the temperature

The appliance is pre-set for normal operation. We recommend temperatures of +41°F (5°C) in the re- frigerator.

In the refrigerator:

WTo reduce the temperature: Press the DOWN button 2.

WTo increase the temperature: Press the UP button 2.

-While you are entering the temperature, the set temperature will flash on the display.

-When you press the temperature setting buttons for the first time, the most recent setting (known as the "reference setting") is displayed.

-You can change the settings in increments of 1°F (1°C) by briefly pressing the buttons again. If the buttons are held down the temperature setting will change faster.

-The system switches back automatically about

5 seconds after the button was last pressed and displays the aver-agecooling temperature (known as the "actual setting").

-You can change the temperatures in the refrig- erator between 48°F (9°C) and 40°F (4°C).

WThe temperature in the BioFresh compartment is controlled automatically, between 32°F (0°C) and 37°F (3°C).

If you require a higher or lower temperature, e.g. for storing fish, you can alter the temperature setting in the BioFresh compartment. See "Addi- tional functions" for more information.

Temperature display

The average temperature in the refrigerator com- partment is displayed in normal mode.

If "F0"to "F5" appears in the display, the appliance has a fault. Consult the customer service depart- ment indicating the fault number displayed, so that they can arrange for your appliance to be serviced accurately and quickly.

Audible alarm signal

The audible alarm signal helps you to protect the food in your refrigerator and save energy.

-It will sound when the door has been open for longer than about 3 minute.

WThe signal will stop when you press the audible

warning on/off button 5,

-or when you close the door.

-The audible warning on/off button only works when the door is open. Once the door is shut, the alarm function automatically switches to standby.

SuperCooling

The SuperCooling function switches the appliance to the coldest chilling setting.

It is ideal if you want to chill large quantities of food, drinks or freshly prepared cakes or meals very quickly or if you want greater humidity, e.g. for salad leaves.

WTo switch on: Press the SuperCooling button 4

briefly so that it lights up. The refrigerator tem- perature will drop to its lowest value.

NB: The SuperCooling function uses slightly more energy. After approx. 6 hours, however, the ap- pliance switches back automatically to normal energy-saving operation.

RBI/RB 1400 EKB/es 4250 5