Troubleshooting the Optional Polar® Telemetry Heart Rate Chest Strap (CONTINUED)
Heart Rate Reading Is Erratic Or Absent Entirely
Malfunction | Probable Cause | Corrective Action |
|
|
|
| Belt transmitter electrodes are | Wet the belt transmitter elec- |
| not wet enough to pick up accu- | |
| trodes (see Section 3.2). | |
| rate heart rate readings. |
|
| Belt transmitter electrodes are | Ensure the belt transmitter elec- |
| trodes are laying flat against the | |
| not laying flat against the skin. | |
| skin (see Section 3.2). | |
|
| |
|
|
|
| Belt transmitter needs cleaning. | Wash the belt transmitter with |
| mild soap and water. | |
|
|
|
| Belt transmitter is not within 3 | Make sure the chest strap trans- |
| feet (1 meter) of the heart rate | mitter is within 3 feet (1 meter) |
| receiver. | of the heart rate receiver. |
|
|
|
|
| Contact Life Fitness Customer |
| Polar telemetry heart rate chest | Support Services for instructions |
| on how to have the Polar | |
| strap battery is depleted. | telemetry heart rate chest strap |
Heart rate reading is erratic or |
| |
| replaced. | |
absent entirely. |
| |
|
| |
| Make sure the Polar telemetry | |
|
| |
|
| heart rate chest strap is installed |
|
| and move closer to the heart |
|
| rate receiver. Wait up to 10 sec- |
|
| onds for the heart rate to display |
|
| on the console. |
|
| Notes: |
| Polar telemetry heart rate chest | 1. Ensure proper adherence of |
| strap did not lock in with the | the Polar telemetry heart rate |
| heart rate receiver. | chest strap to user’s chest. |
|
| 2. Ensure proper conductivity |
|
| between the electrodes and |
|
| user’s chest. |
|
| 3. If needed, use the Polar |
|
| watch to verify chest strap’s |
|
| operation. |
|
|
|
11