TOOLS REQUIRED FOR ASSEMBLY...
Magnetic #2 Bit Phillips Screwdriver, T-27, T-40 and T-45 Torx Wrenches, 16mm Open End Wrench, 9/16” Open
End Wrench or Socket, 5mm, 6mm Hex Key Wrenches, Side Cutters
PARTS DESCRIPTION
1 Hex Button Head Screw Qty: 3
M8 – 1.25 x 25
0017-00101-1903
2 Rear Step Qty: 1
AK68-00136-0000
3 Handrail Upright Qty: 2
OK68-01032-0000
4 Hex Head Screw Qty: 2
3/8 - 16 x 1
0017-00101-1635
5 Hex Socket Head Screw Qty: 5
M8 – 1.25 x 22
0017-00101-1881
6 Flat Washer Qty: 3
16mm
0017-00104-0469
7 Console Support Assembly Qty: 1
AK62-00123-0000
8 Torx Socket Head Screw Qty: 12
M8 – 1.25 x 19
0017-00101-1791
9 Accessory Tray Qty: 1
OK62-01022-0000
10 Phillips Pan Head Screw Qty: 2
M4.2 – 0.70 x 10
0017-00101-1846
11 Console Assembly Qty: 1 12 Phillips Pan Head Screw Qty: 14
M4 – 0.70 x 19
0017-00101-1796
13 Console Support Cover Qty: 1
OK62-01023-0000
14 Cap: Console Support Qty: 1
OK62-01030-0000
15 Grommet Qty: 2
0017-00042-0754
16 Handrail Qty: 1
AK68-00206-0000
17 Torx Button Head Screw Qty: 4
1/4 - 20 x 5/8
0017-00101-1760
18 Left Back Bullhorn Cover Qty: 1
OK62-01011-0000
19 Right Back Bullhorn Cover Qty: 1
OK62-01010-0000
20 Torx Button Head Screw Qty: 4
M8 – 1.25 x 25
0017-00101-1805
21 Left User Arm Assembly Qty: 1
AK68-00143-0002
22 Right User Arm Assembly Qty: 1
AK68-00143-0001
23 Front Rocker Cover Qty: 2
OK62-01009-0000
24 Front Pivot Arm Cover Qty: 2
OK62-01012-0000
25 Rear Pivot Arm Cover Qty: 2
OK62-01013-0000
26 Left Bullhorn Cover Qty: 1
OK62-01008-0001
27 Right Bullhorn Cover Qty: 1
OK62-01007-0001
28 Phillips Pan Head Screw Qty: 2
M4.2 – .70 x 44
0017-00101-1854
29 Foot Cover Qty: 2
OK62-01003-0000
30 Flat Washer Qty: 2
0017-00104-0479
31 Endcap Qty: 2
OK61-01283-0001
This product is preconfigured to accept the addition of the Life Fitness Entertainment System. A POWER CABLE and
COAXIAL CABLE have been pre-installed. Please read both the product assembly instructions and Entertainment
Ready assembly instructions (included with the Life Fitness Entertainment System) prior to assembly.
Route the POWER CABLE and COAXIAL CABLE alongside the MAIN WIRE HARNESS where applicable.
When installing the Life Fitness Entertainment System, refer to the 95Xer or 95Xez procedures stated in the Life
Fitness Entertainment System installation instructions.