Life Fitness 95LI 12, 24, 25 P, 18

28. Locate one FRONT PIVOT ARM COVER (24) and one

BACK PIVOT ARM COVER (25). Position the BACK PIVOT

ARM COVER over the user side of the ROCKER ARM (P)

making sure that it interlocks with the RIGHT BACK

BULLHORN COVER (18). Place the FRONT PIVOT ARM

COVER over the opposite side of the ROCKER ARM in the

same manner. Secure the COVERS using two PHILLIPS

PAN HEAD SCREWS (12). Tighten the SCREWS securely.

Do not over-tighten the SCREWS.

29. Repeat steps 22 through 24 to install the LEFT ROCKER

COVER (23), PIVOT ARM COVERS (24 & 25), and

BULLHORN COVER (26).

NOTE: The left PIVOT ARM COVERS are reversed front

and back. The SCREWS will be installed from the rear.

30. Locate the two FOOT COVERS (29). Align the COVERS

with the ends of the STABILIZER BARS (Q). Insert the

post on the underside of the FOOT COVERS into the

mounting holes on the top of each STABILIZER. Press the

FOOT COVERS firmly into position.

31. Position the unit into the desired location for use. Properly

level the unit according to the instructions in the Operation

Manual.

Physical Dimensions:

95Li

Length 68 inches / 172.7 centimeters

Width 33 inches / 83.8 centimeters

Height 73 inches / 185.4 centimeters

Weight 345 pounds / 156.5 kilograms

25 P