Life Fitness 95LI

23. Tighten the three BOLTS of the REAR STEP (2) securely.

24. Tighten the two BOLTS of the HANDRAIL UPRIGHTS (3)

securely.

25. Locate and install the USER ARMS (21 & 22) using three

SCREWS (8) each. Tighten the SCREWS securely.

NOTE: Orient the USER ARMS so the bends at the

HANDGRIPS face the front of the unit as shown.

26. Locate one FRONT ROCKER COVER (23). Position the

RIGHT BACK BULLHORN COVER (18) over the user side

of the ROCKER ARM SHAFT (N) making sure that it seats

fully over the BULLHORN MOUNTING BRACKET (H). Place

the FRONT ROCKER COVER over the opposite side of the

ROCKER ARM SHAFT in the same manner. Secure the

COVERS using two PHILLIPS PAN HEAD SCREWS (12).

Tighten the SCREWS securely. Do not over-tighten the

SCREWS.

27. Locate and attach the RIGHT BULLHORN COVER (27) to

the base of the BULLHORN using one SCREW (28). Tighten

the SCREW securely. Do not over-tighten the SCREW. Slide

the GASKET (O) down to the bullhorn base above the

BULLHORN COVER.