7
STEP 1:
Assemble the BACK PAD (1)to the BACK PAD BRACKET
(2) using four M10 x 30mm SCREWS (3) and four 3/8”
SAE WASHERS (4). Tighten the SCREWS securely. Do
not over-tighten the SCREWS.
Attach the BACK PAD BRACKET(2) to the BASE
FRAME (5) using two SEATPINS (6). Be sure the SEAT
PINS are fully engaged through the opposite side of the
BASE FRAME.
STEP 2:
Assemble the SEATPAD (7) to the SEAT PAD BRACKET(8) using two M10 x
30mm SCREWS (3) and two 3/8” SAE WASHERS (4). Tighten the SCREWS
securely. Do not over-tighten the SCREWS.
Attach the SEATPAD BRACKET (8) to the BASE FRAME (5) using one
SEATPIN (6).
Be sure the tab (A) of the SEATPAD BRACKET (8) is positioned
under the MAIN BASE FRAME TUBE (B).
Be sure the SEATPIN is fully engaged through
the opposite side of the BASE FRAME.
1
4
3
4
35
2
6
6
7
8
6
4
6
3
A
B