Life Fitness OHDPR9 17 1/2 X 1-1/2” BOLT 26 1/2 X 4-1/4” BOLT 16 1/2 X 4-1/2” BOLT, 1/2” LOCKNUT

Models: OHDPR9

1 16

Page 3

26 1/2 X 4-1/4” BOLT

16 1/2 X 4-1/2” BOLT

LOCKNUT

DOME WASHER

FLAT WASHER

LOCKNUT

Image 3

Contents

OLYMPIC HEAVY DUTY POWER RACK 9’ ASSEMBLY INSTRUCTIONSOHDPR9 3/4”, 9/16” wrench Ratchet with 3/4”, 9/16” socket 7/32” Allen Wrench PARTS LISTTools Required for Assembly Bolt Length Ruler3/8” INT TOOTH LOCK WASHER 17 1/2 X 1-1/2” BOLT 26 1/2 X 4-1/4” BOLT 16 1/2 X 4-1/2” BOLT18 3/8 X 3-3/4” FLAT HEAD BOLT 1/2” INT TOOTH LOCK WASHERSTEP 26 1/2 X 4-1/4” Use this set of holes for assembly with PLATFORM Use this set of holes for assembly without PLATFORMSTEP STEP LOOSELY assemble the FRONT UPRIGHT 3 to the LEFT UPRIGHT BASE 1 using two 1/2 X 4-1/4” BOLTS 26, two 1/2” PLASITC DOME WASHERS 22, two 1/2” INT TOOTH LOCK WASHERS 20 and two 1/2” LOCK NUTS 23 as shown in FIGURE1/2 X 4-1/2” STEPSTEP 1/2 X 4-1/4”1/2 X 4-1/2” STEP TIGHTEN TIGHTENTIGHTEN STEP Securely tighten all loose frame connections made to this pointSETTINGADJUSTMENTRACKWIDTHSEEDETAIL8 DETAILSTEP 1/2 X 4-1/4” STEPTighten connection SECURELY then back nut off 1/2 turn STEP17 1/2 X 1-1/2” STEP Insert the LEFT BAR SUPPORT 12 into the desired slots of the LEFT ADJUSTMENT RACK 10, and allow it to drop down to lock in place. See FIGURESTEP equipment, call your local Hammer Strength distributor3. Exercise with care to avoid injury PREVENTATIVE MAINTENANCE TIPSCAUTION-PLEASE READ follow these rules