SM30 Unpacking & Assembly Instructions
5
Figure 3. Configuration for 2-3/4” and 3” bolts.
2. Bolt on the teardrop pulleys above the bench and the tricep pulldown (see Figure 3) on
both cubes using six 3/8” x 2-3/4” hex head bolts. Include the 3/8” flat washer, end cap
washers, end caps and 3/8” Nyloc (locknut). Use the bolt configuration shown in the
figure. You may wish to use a pinch bar to align the bolt holes.
3/8” x 2-3/4” (4)
Figure 4. Bolt on the two teardrop pulleys.