SM30 Unpacking & Assembly Instructions
9
6. Mount adjustable pulley bracket. When shipped, the adjustable pulley bracket looks
like the one shown in Figure 10. The bolts need to be removed and the bracket needs to
be positioned so that the top of the bracket is in the top hole as shown by the arrow in
Figure 10. Use a 3” bolt with flat washers, end cap washers and end caps. When you
remove the bolts, leave the pulley bolt and pulley out since you will need to thread the
cable with the pulley removed.
Figure 10. Mount adjustable pulley bracket.
7. Mount the lat bench to the frame. Using the bolts specified and 9/16” socket and
combination wrenches, mount the bench to either side of the frame as shown in Figures
11 and 12.
3/8” x 3” (2)3/8” x 2-3/4” (4)
Figure 11. Mount the bench to the frame.