Set the weight stack cells | Life Fitness SM51 manual

SM51 Unpacking & Assembly Instructions

Figure 3. Set the weight stack cells.

2.Bolt on the teardrop pulleys above the benches (see Figure 4) on the 4 stack cell using two 3/8” x 2-3/4” hex head bolts (used to bolt the cross beam to the cross members and the adjustable pulley tops to the top beams). Include the 3/8” flat washer, end cap washers, end caps and 3/8” Nyloc (locknut). Use the bolt configuration shown in Figure 5. You may wish to use a pinch bar to align the bolt holes.

Life Fitness SM51 manual Set the weight stack cells

Models: SM51

Figure 3. Set the weight stack cells.

Figure 4. Bolt on the teardrop pulleys.