SEATED ROW SU50
ASSEMBLY INSTRUCTIONS
The Seated Row SU50 comes disassembled in two pieces. Follow the steps below to assemble it.
TOOLS NEEDED
9/16” |
| 9/16” | 7/8” open end |
socket wrench | box wrench | wrench or | |
|
|
| crescent wrench |
| 1 hr |
|
|
45 min | 15 min |
|
|
30 min ASSEMBLY TIME
One person can accomplish this assembly in approximately ½ hour.
UNPACKING AND PARTS
CAUTION: ASSEMBLING THE SEATED ROW SU50 REQUIRES THE ABILITY TO MOVE HEAVY COMPONENTS. THE WEIGHT STACK SUBFRAME OF THE SU50 IS LARGE AND HEAVY AND MAY CAUSE INJURY OR DEATH IF IT FALLS ON SOMEONE. USE CAUTION WHEN ASSEMBLING THIS MACHINE.
1.Unpack the Weight Stack Subframe and the Seat Subframe from the crate. Stand the Weight Stack Subframe up on its four feet. Stand the Seat Subframe up as shown in Figure 1. Remove the cable and bolts pack.
1 |
