SUPER MICRO Computer MBDX7DA3O specification

X7DA3+ User's Manual

D-2 Installing the Windows XP/2000/2003 for systems with RAID Functions

New Operating System-Windows XP/2000/2003 Installation

1.Insert the Microsoft Windows XP/2000/2003 Setup CD in the CD Driver, and the system will start booting up from CD.

2.Press the <F6> key when the message-" Press F6 if you need to install a third party SCSI or RAID driver" displays.

3.When the Windows XP/2000/2003 Setup screen appears, press "S" to specify additional device(s).

4.Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ESB2 into Drive A: and press the <Enter> key.

5.Choose the Intel(R) ESB2 SATA RAID Controller from the list indicated in the XP/2000/2003 Setup Screen, and press the <Enter> key.

6.Press the <Enter> key to continue the installation process. (If you need to specify any additional devices to be installed, do it at this time.) Once all devices are speci- ﬁ ed, press the <Enter> key to continue with the installation.

7.From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The XP/2000/2003 Setup will automatically load all device ﬁ les and then, continue the Windows XP/2000/2003 installation.

8.After Windows XP/2000/2003 Installation is completed, the system will automati- cally reboot.

Note: the current version of the ESB2 SATA RAID Utility can only support the Windows XP/2000/2003 Operating System.

D-10

Image 122

SUPER MICRO Computer MBDX7DA3O user manual New Operating System-Windows XP/2000/2003 Installation

Contents

Super Page Conventions Used in the Manual About This ManualManual Organization Table of Contents Table of Contents Appendices TroubleshootingBios Checklist Overview Asia-Paciﬁc Contacting Supermicro HeadquartersEurope X7DA3+ Image X7DA3+ Motherboard Layout SAS ACT4-7 LEDs Jumper Description Default Setting Quick Reference X7DA3+ Motherboard Features Other DimensionsOnboard I/O CD/Diskette Utilities Block Diagram of the 5000X Greencreek Chipset MCH Xeon Dual Core Processors Xeon Dual Core Processor FeaturesChipset Overview Special Features PC Health Monitoring Main Switch Override Mechanism Acpi FeaturesSlow Blinking LED for Suspend-State Indicator CPU Overheat LED and Control External Wake-On-LAN Power SupplySuper I/O Page Page Static-Sensitive Devices Motherboard InstallationPrecautions Unpacking Processor and Heatsink Installation Installing the LGA771 ProcessorPage Installing the Heatsink CEK Heatsink Installation Uninstalling the Heatsink Memory Support Installing DIMMsDimm Installation See Figure Possible System Memory Allocation & Availability Installing and Removing DIMMsTop View of DDR2 FBD Control Panel Connectors/IO Ports Back Panel Connectors/IO Ports JF1 Header Pins Front Control Panel Front Control Panel Pin Deﬁnitions NMI Button Power LEDPower LED Pin Deﬁnitions JF1 NMI Button Pin Deﬁnitions JF1 Pin# Deﬁ nition Vcc 10/12 Ground NIC1/NIC2 LED IndicatorsPin# Deﬁ nition 13 +5V HD Active OH/Fan Fail LED PWR Supply Fail Power Fail LEDOverheat/Fan Fail LED OH Reset Button PWR Button Reset ButtonPower Button Reset Button Pin Deﬁnitions JF1 Processor Power Connector Connectors and HeadersATX Power Connector Back Panel USB USB0/1/2/3 Universal Serial Bus USBChassis Intrusion Front Panel USB Pin Deﬁnitions USB4 Fan Headers Fan Header Pin Deﬁnitions Fan1-8 Keyboard/Mouse ATX PS/2 Keyboard and PS/2 Mouse PortsSerial Port PS/2 Keyboard Mouse Port Pin Deﬁnitions Wake-On-Ring Pin Deﬁnitions Wake-On-RingWake-On-LAN Wake-On-LAN Pin Deﬁnitions Glan 1/2 Giga-bit Ethernet Ports Power LED/SpeakerSpeaker Connector GLAN1/2 PWR LED/Speaker Overheat LED/Fan Fail JOH1 Power Fault PWR Supply FailurePower Fault Overheat LED Pin# Deﬁ nition Data Ground Clock No Connection Power SMB I2 C ConnectorSMB Header Pin Deﬁnitions Pin# Deﬁ nition Clock Data PWR Fail Ground +3.3V Sgpio Headers Compact Flash Card PWR ConnectorCompact Flash Card PWR Connector Compact Flash PWR B. Sgpio HD Audio CD1 CD ConnectorHigh Deﬁnition Audio HD Audio CD1 Pin Deﬁnition Glan Port1 Enable Glan Port2 Enable Jumper SettingsGlan Enable/Disable Glan Enable Watch Dog Jumper Settings JWD Watch Dog Enable/DisableClear Cmos Watch Dog Enable Cmos Clear 3rd PWR Fail SAS Enable 3rd PWR Supply PWR Fault Detect J3PSAS Controller Enable Disable 3rd PWR Supply PWR Fault Jumper Settings Alarm Reset Alarm ResetCompact Flash Master Slave Select Alarm Reset Compact Flash Master/Slave Select Jumper Setting Deﬁ nition Pins Enabled Disabled Default JI2C 1/2 JI2C 3/4 SAS EnableSMBus to PCI-X/PCI-Exp Slots Jumper Settings SMB to PCI-X/PCI-E Slots Glan LEDs Onboard IndicatorsOnboard Power LED Act. #4-#7 LEDs Onboard SAS Activity LED IndicatorsSAS Act. #0-#3 LEDs SAS Act. #4-#7 LEDs Act. #0-#3 LEDs Parallel Printer Port Parallel Port Floppy Floppy ConnectorSimlp Ipmi Slot IDE Connectors IDE#1 IDE#2 Compact Flash SAS Connectors SAS #0-#3 SAS #4-#7 No Power Troubleshooting ProceduresBefore Power On No Video Memory Errors Technical Support ProceduresLosing the System’s Setup Conﬁguration Frequently Asked Questions Returning Merchandise for Service Starting the Setup Utility System BiosHow To Change the Conﬁguration Data Press the Delete key to enter Setup Running SetupMain Bios Setup System Time Main Setup FeaturesBios Date System Date Type Multi-Sector Transfer Ultra DMA Mode LBA Mode ControlTransfer Mode Native Mode Operation Sata Ahci Available when Sata RAID is disabled Advanced SetupICH RAID Code Base Available when Sata RAID is enabled System Memory Quiet Boot Boot FeaturesQuickBoot Mode Post Errors Cache Video Bios Area Power Loss ControlMemory Cache Cache System Bios Area Watch Dog Discrete Mtrr Allocation Default Primary Video AdapterCache Extended Memory PCI Conﬁguration PCI Fast Delayed Transaction Emulated IRQ SolutionsPCI Parity Error Forwarding Reset Conﬁguration Data Large Disk Access Mode Enable MasterLatency Timer Serr Signal Condition Branch 0 Rank Sparing/Branch 1 Rank Sparing Memory Branch ModeHigh Temperature Dram Operation Branch 0 Rank Interleaving/Branch 1 Rank Interleaving Snoop Filter Crystal Beach FeaturesClock Spectrum Feature HD High Deﬁnition Audio Controller Machine Checking Available when supported by the CPU Frequency Ratio Available when supported by the CPUCore-Multi-Processing Available when supported by the CPU Thermal Management 2 Available when supported by the CPU DCA Delay ClocksAvailable when supported by the CPU Hardware Prefetch Available when supported by the CPUDirect Cache Access Available when supported by the CPU Intel Eist Support Available when supported by the CPU Serial Port a Device ConﬁgurationKBC Clock Input Base I/O Address DMI Event Logging DMA ChannelFloppy Disk Controller Event Log Validity Baud Rate Console RedirectionCOM Port Address Console Type Voltage Monitoring CPU Temperature ThresholdHardware Monitor Logic Fan Speed Control Modes Existing Event Log Number System Event LoggingClear System Event Logging Event Log Control Timer for Loading OS Minutes System Event Log/System Event Log List ModeOS Boot Watch Dog Time Out Option Realtime Sensor Data User Password Is Security SettingsSupervisor Password Is Set Supervisor Password Boot Priority Order/Excluded from Boot Orders Boot SettingsPassword on Boot Exit Page Monitor type does not match Cmos Run Setup Keyboard errorKeyboard locked Unlock key switch System battery is dead Replace and run Setup Real time clock error System Cmos checksum bad Default conﬁguration usedSystem timer error Check date and time settings Allocation Error for device System cache error Cache disabledFail-Safe Timer NMI Failed Entering Setup Device IRQ conﬂict PS/2 Mouse Boot Summary ScreenInvalid System Conﬁguration Data Nnnn kB Extended RAM Passed System Bios shadowed Press F1 to resume, F2 to Setup, F3 for previousPress F2 to enter Setup Video Bios shadowedPage Appendix B Post Error Beep Codes Page Using the Adaptec RAID Conﬁguration Utility Adaptec Embedded SAS with HostRAID Controller Using the Array Conﬁguration Utility Managing Arrays RAID 1 only-the following prompt is also displayed Viewing Array PropertiesDeleting Arrays Creating Arrays To create an array No Init Creating a RAID 0 on new drives Assigning Array PropertiesTo assign properties to the new array InitPage Adding a Bootable Array To make an array bootable Deleting a Bootable Array To delete a bootable array To Delete a HotSpare Drive Adding/Deleting HotsparesTo Add a HotSpare Drive Initializing Disk Drives Page Page Rebuilding Arrays To Rebuild an array Using the SerialSelect Utility to Conﬁgure SAS Settings To access the SAS utilities To Set Controller Conﬁguration To Set Physical Conﬁguration Following options are available Using the Disk UtilitiesTo access the disk utilities To Exit Adaptec RAID Conﬁguration Utility Installing the ESB2/SAS Driver and the Operating System Page Serial ATA Sata Introduction to Serial ATA and Parallel ATAImportant Notes to the User Introduction to the Intel ESB2 Serial RAID Controller Hub Intel HostRAID Conﬁgurations Intel Matrix Storage Using the Intel ESB2 Sata RAID Utility Program Creating, Deleting and Resetting RAID Volumes Creating a RAID 0 Volume Creating a RAID 1 Volume Creating a RAID 10 RAID 1+ RAID Creating a RAID 5 Set Parity Deleting RAID Volume Resetting to Non-RAID and Resetting a RAID HDD Exiting the Intel Matrix Storage Manager Utility New Operating System-Windows XP/2000/2003 Installation Appendix E Installing Other Software Programs and Drivers Installing Other Software Programs and Drivers Conﬁguring Supero Doctor Supero Doctor III Interface Display Screen-II Remote Control