
X7DA3+ User's Manual
I/O Device Configuration
Access the submenu to make changes to the following settings.
KBC Clock Input
This setting allows you to select clock frequency for KBC. The options are 6MHz, 8MHz, 12MHz, and 16MHz.
Serial Port A
This setting allows you to assign control of Serial Port A. The options are Enabled (user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Base I/O Address
This setting allows you to select the base I/O address for Serial Port A. The options are 3F8, 2F8, 3E8, and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for Serial Port A. The options are IRQ3 and IRQ4.
Serial Port B (Not for external use, used for IPMI only)
This setting allows you to assign control of Serial Port B. The options are Enabled (user defi ned), Disabled, Auto (BIOS controlled) and OS Controlled.
Mode
This setting allows you to set the Port B. The options are Normal
type of device that will be connected to Serial and IR (for an infrared device).
Base I/O Address
This setting allows you to select the base I/O address for Serial Port B. The options are 3F8, 2F8, 3E8 and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for Serial Port B. The options are IRQ3 and IRQ4.
Parallel Port
This setting allows you to assign control of the parallel port. The options are Enabled (user defi ned), Disabled and Auto
Base I/O Address
Select the base I/O address for the parallel port. The options are 378, 278 and 3BC.
Interrupt
This setting allows you to select the IRQ (interrupt request) for the parallel port. The options are IRQ5 and IRQ7.