Appendix C: Installing the Adaptec HostRAID Utility and the Windows OS
Rebuilding Arrays
Note 1: You can use Rebuilding on Fault Tolerant array (RAID 1) only.
If an array Build or Initialization process is interrupted or critical with one member missing, you must perform a Rebuild to get the array to the Optimal status. For a critical array Rebuild operation, the optimal drive is the source drive.
Note 2: If no spare array exists and a hard disk drive fails, you need to create a spare before you can rebuild an array.
To Rebuild an array:
1 From the Main Menu, select Manage Arrays (as shown in the screen below). From the List of Arrays, select the array you want to Rebuild.
2 Press <Ctrl> <R> for Array Rebuild.
