Lifebreath 1200DDPOOL Model 1000RHC and Model 1000RHCAC, Specifications, Performance, Warranty

WEIGHT

99-101

99-130

SPECIFICATIONS

CORES

Modular (3 section) patented aluminum heat recovery cores arranged for high efficiency cross-flow ventilation. Meets the flame spread and smoke developed classifications of the National Building Code and NFPA 90A (1993 Edition).

MOTORS

Two PSC, 3 speed double shafted, 120 VAC, 3.95 Amps each (7.9 total on high speed). HP - 1/4, 1625 RPM. Watts - total on high speed - 848.

FILTERS Washable air filters in exhaust and supply air streams.

BLOWERS

Each air stream has one double shafted motor driving 2 centrifugal blowers.

HYDRONIC REHEAT COIL

Standard built-in coil in both 1000RHC and 1000RHCAC. Rated 35,000 BTU

@140°F, 3 US gal./min. Design temperature drop is 20°F, fluid pressure drop is 1.3 feet WG at rated flow, 3/4" fittings.

CONNECTION DUCT SIZES Five - 20" X 8" H (508 mm x 200 mm H).

DIRECT EXPANSION (DX) EVAPORATOR COIL (model 1000RHCAC only) Factory installed 1.5 ton DX coil, 0.875" OD suction side, 0.625" OD liquid side, built-in orifice.

MOUNTING

Two brackets under cabinet, connect to threaded rod type supports (not included).

CASE

20 gauge prepainted galvanized steel (G60) for superior corrosion resistance. Insulated with foil faced insulation where required to prevent exterior conden- sation. Drain connections; two - 1/2" (12 mm) O.D.

CONTROLS

Illuminated power switch, 3 speed blower control, low voltage (24 VAC) termi- nals to connect remote controls (not included), defrost light indicating defrost/recirculation mode.

DEFROST CONTROLS

Supply bypass damper routes indoor air to defrost core.

255 lbs.(116 Kg) SHIPPING WEIGHT 280 lbs.(127 Kg)

DIMENSIONS 1000RHC/RHCAC mm (inches)

Model 1000RHC and

Model 1000RHCAC

PERFORMANCE

AIRFLOWS (Each Air Stream)

L/s (CFM)	613 (1300)								VAC
									(AMPS) @ 120
	566 (1200)							8.1 HIGH
	518 (1100)
	472 (1000)					HIGH SPEED		7.8 MED
AIRFLOW	423 (900)								CURRENT DRAW
	378 (800)							7.1 LOW
	329 (700)
	282 (600)
	235 (500)
									TOTAL
	25 (.1)	50 (.2)	75 (.3)	100 (.4)	125 (.5)	150 (.6)	175 (.7)	200 (.8)

EXTERNAL STATIC PRESSURE IN PASCALS (in. W.C.)

TEMPERATURE EFFECTIVENESS

EFFECTIVENESS	50%
	70%
	60%

NOTE: Exhaust Relative Humidity (RH) at 40%

235 282 329 378 423 472 518 566

(500) (600) (700) (800) (900) (1000) (1100) (1200)

AIRFLOW IN L/s (CFM)

Performance data includes both reheat and DX coil installed. Note there is little change in air flow with the DX coil removed.

DEFROST &			SUPPLY AIR		EXHAUST AIR
		FROM OUTSIDE
RECIRCULATION					TO OUTSIDE
AIR
NOTE:
Service clearance
is 760 mm (30 in.)
EXHAUST AIR
FROM BUILDING		1088 mm
				DRAIN CONNECTION	SUPPLY AIR
	(46 3/4")

TO BUILDING

FRONT VIEW

CONTROLS

508 mm

(20")

263 mm

(10 3/8 ")

200 mm

(8")

	1055 mm
COIL FITTINGS	(41 1/2")

DISCHARGE SIDE

625mm (24 5/8")

263 mm	508 mm
(10 3/8 ")
	(20 ")

149 mm (5 7/8 ")

508 mm

(20 ")

INLET SIDE

Sixty Minute Remote Timer WARRANTY

Remote Wall Mount Dehumidistat Control 24VAC only

All units conform to CSA and UL standards.

Units carry a 15 year warranty on the heat recovery cores and a 2 year replacement parts warranty.

NOTE: Hydronic reheat coil is designed to temper the ventilation air (after heat recovery) back to room temperature, and is not intended for use as a primary heating source for the space.

•Additional controls MUST be added to pump system (not included / not available from Nutech) feeding the coil to ensure continuous water flow through it, and prevent freezing of the coil.

•DX coil is designed to reduce humidity brought in from outside during ventilation. Coil MUST be connected to an outdoor condensing unit (not included) by certified trades person. Not intended as a primary air conditioning system for the space.

DATE:_____________________________________________PROJECT: ________________________________________

MECHANICAL CONTRACTOR: __________________________________________________________________________

5	TI-115
	1203