Handlebar Support Post Assembly

1. Remove screw L , washer M and nut N from both right/left sides of base frame.

2. Stand up the support post and handle bar. (FIG-1 )

3.	Attach screw L , washer M and nut N back to both right/left sides of base frame
	and tighten the screws.
4.	Attach right base cover on base frame and tighten by screw R . Repeat the same
	step on the left side.

Handlebar Assembly

1.Adjust the handlebars so they are positioned on the handlebar posts. Secure the right/left

handle bar on the support post by tightening the screws O . ( FIG-4 )

2.Rotate the console tube so the console bracket is positioned as shown in Figure 4.