Light & Motion DSR-PD150 To eject a “Memory Stick”, Inserting a “Memory Stick”, Using a “Memory Stick” – introduction

Using a “Memory Stick” – introduction

Inserting a “Memory Stick”

Insert the “Memory Stick” with the Sony logo pointing toward the LCD panel and the b mark pointing inward.

Access lamp

To eject a “Memory Stick”

Push the “Memory Stick” inward, then release your finger. The “Memory Stick” comes out a little.

Note

The “Memory Stick” may pop out depending on the way you push it.

When the access lamp is lit or flashing

Never shake or strike your camcorder. Do not turn the power off , eject a “Memory Stick” or remove the battery pack. Otherwise, image data breakdown may occur.

If the “ MEMORY STICK ERROR” indicator appears

The “Memory Stick” is broken or the file format is not proper. Eject the “Memory Stick,” check it, and insert it again. If the same indicator appears, use another “Memory Stick.”

Operations ”Stick Memory“

115