Copying an image recorded on a “Memory Stick” to tapes

You can copy still images or titles recorded on a “Memory Stick” and record them to a tape.

Before operation

Insert a tape for recording and a “Memory Stick” for playback into your camcorder.

(1) Set the POWER switch to VCR.

(2) Using the video control buttons, search for a point where you want to record the desired still image. Set the tape to playback pause mode.

(3) Press zREC and the button on its right simultaneously on your camcorder. The tape is set to the recording pause mode.

(4) Press MEMORY PLAY to play back the still image you want to copy.

(5) Press Xto start recording and press Xagain to stop.

(6) If you have more to copy, repeat steps 4 and 5.

3

REC

1

POWER

VCR

 

OFF (CHG)

 

CAMERA

MEMORY

4 PLAY2

5

PAUSE

To stop copying in the middle

Press x.

During copying

•You cannot operate the following buttons:

MEMORY PLAY, MEMORY INDEX, MEMORY DELETE, MEMORY +, MEMORY –, and MEMORY MIX.

•If you continue copying, do not use EDITSEARCH to search for the point where you want to record the desired still image. If you do, the playback image disappears from the screen.

132