Light & Motion DSR-PD150 manual 76

Dubbing only desired scenes - Digital program editing

(10)Turn the SEL/PUSH EXEC dial to select “CUT-IN,” then press the dial.

(11)Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT-IN, then press the dial.

The calculated start position for recording is set.

(12)Turn the SEL/PUSH EXEC dial to select “CUT-OUT,” then press the dial.

(13)Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT-OUT, then press the dial.

The calculated stop position for recording is set.

(14)Turn the SEL/PUSH EXEC dial to select RETURN, then press the dial.

10,11

OTHERS			OTHERS
ED I T SET			ED I T SET
	ADJ TEST	0		ADJ TEST
	“CUT–I N”			“CUT–I N”	0
	“CUT–OUT”			“CUT–OUT”
	RETURN			RETURN
[MENU] : END			[MENU] : END

12,13

OTHERS			OTHERS
ED I T SET			ED I T SET
	ADJ TEST			ADJ TEST
	“CUT–I N”	0		“CUT–I N”
	“CUT–OUT”			“CUT–OUT”	0
	RETURN			RETURN
[MENU] : END			[MENU] : END

Errors in editing

If you connect your camcorder to Sony equipment with the DV jack, the range of errors is within +/– 5 frames.

The range may become wider in the following conditions:

•The interval between CUT-IN and CUT-OUT is less than five seconds (p. 77).

•CUT-IN or CUT-OUT is set at the beginning of the tape.

76