Marking an Index

If you mark an index at the scene you want to search for, you can easily search for the scene later (p. 64).

In recording mode [a]:

Press INDEX MARK.

The “INDEX MARK” indicator appears on the LCD screen or in the viewfinder for seven seconds and the index is marked after the indicator disappears.

In standby mode [b]:

Press INDEX MARK.

The “INDEX STBY” indicator appears on the LCD screen or in the viewfinder. And when you press START/STOP to start recording, the “INDEX STBY” indicator changes to “INDEX MARK” and after the indicator disappears, the index marking is complete. The camcorder starts index-marking at the 11th frame from the recording start point. An index signal will be recorded on cassette memory about 0.3 sec, and on a tape about five seconds.

You can mark an index in VCR mode (p. 82).

Operations Recording Advanced

[a]

 

[b]

 

 

STBY

 

REC

 

 

 

I NDEX

INDEX MARK

 

STBY

I NDEX

 

 

REC

 

MARK

 

 

I NDEX

MARK

To cancel index marking

Press INDEX MARK again in standby mode.

Notes on the index

Index marks are recorded during recording, you cannot mark an index after recording.

Index signals will be recorded both on the tape and on cassette memory. If you use cassettes without cassette memory or the cassette memory is full, the signals will be recorded only on the tape.

When you record over the recorded tape and mark an index on the tape, we recommend that you clear all data in the cassette memory before marking an index.

63