Light & Motion DSR-PD150 Using the fader function, To cancel the fader function

Using the fader function

(1) When fading in [a]

In standby mode, press FADER until the desired fader indicator flashes.

When fading out [b]

In recording mode, press FADER until the desired fader indicator flashes. The indicator changes as follows:

FADER t MONOTONE t OVERLAP t WIPE t DOT t no indicator The last selected fader mode is indicated first.

(2) Press START/STOP. After the fade in/out is carried out, your camcorder automatically returns to the normal mode.

1

FADER

FADER

2

POWER

VCR
OFF (CHG)
CAMERA	MEMORY

To cancel the fader function

Press FADER until the indicator disappears.

Note

You cannot use the following functions while using the fader function, and vice versa:

–Digital effect

–Tape Photo recording

–Interval recording

–Cut recording

When the OVERLAP, WIPE, or DOT indicator appears

Your camcorder automatically stores the image recorded on a tape. As the image is being stored, the fader indicator flashes fast, and the playback picture appears.

38