8 5 0 i R U s e r M a n u a l
OUTPUT TO PERSONAL FM TRANSMITTER
1.Turn the ALD (Assistive Listening Device) volume control on the back panel all the way down (fully counterclockwise).
4 | VOL. |
|
| ALD OUT AUX OUT | |
| ADJ. |
DC POWER CHARGERS
OFF ON 24VDC
AUDIO INPUTS VOL.ADJ. COMPUTER
L TV/VCR R L CD/DVD R
800iX | ADJ |
INPUT |
|
| PAGING INPUT |
250 | 400 | 700 | 1K | 1K4 | 2K5 | 4K | 6K |
|
|
| +10 |
|
|
|
|
0 | SENSOR INPUTS |
2.Determine the size and type of audio input jack on the device as many manufacturers’ products differ in connector size and shape. The LightSPEED
| VOL. | COMPUTER | AUDIO INPUTS |
| ||
ALD OUT AUX OUT |
|
|
|
| ||
ADJ. |
|
|
|
|
| |
|
| L | TV/VCR | R L | CD/DVD | R |
POWER CHARGERS |
|
800iX | ADJ |
INPUT |
|
C | PAGING INPUT |
250 | 400 | 700 | 1K | 1K4 | 2K5 | 4K | 6K |
|
|
| +10 |
|
|
|
|
0
3. Connect a patch cable from the ALD’s microphone jack or AUX input to the 3.5 mm audio jack labeled “ALD OUT” on the back of the 850iR.
4.Adjust the volume control on the ALD’s receiver
to maximum output. NOTE! This is to set the maximum allowable signal from the 850iR.
5. With the 850iR and ALD turned on, speak into the LightMic and slowly adjust the corresponding “ADJ” volume control until the appropriate audio level is attained in the ALD’s receiver headphones.