LightSpeed Technologies 850iR user manual OPERATING THE OPTIONAL HM-70HANDHELD MIC, On Off Mute

Models: 850iR

1 30
Download 30 pages 23.95 Kb
Page 20
Image 20
OPERATING THE OPTIONAL HM-70 HANDHELD MIC

8 5 0 i R U s e r M a n u a l

OPERATING THE OPTIONAL HM-70 HANDHELD MIC

LES 850iR Classroom Amplification System

ON

OFF

MUTE

(Center Position)

The Channel A/B switch is located inside the battery compartment. The switch is set to Channel B at the factory.

1.Slide the power switch on the side of the HM-70 all the way up. The power indicator LED will glow red and stay on.

2.The center position of the power switch is MUTE. When in this mode, the HM-70 is transmitting a signal, but no audio can be heard through the system. This is useful if you wish to temporarily turn audio off during a private conversation.

3.Grip the barrel of the HM-70 in the center section just below the power switch. Avoid gripping the HM-70 around the bottom, covering the infrared emitters circling the base. This could interrupt signal trans- mission from the microphone to the receiver.

4.Speak directly into the microphone at a normal level. Slowly increase the B VOLUME until you can just hear your voice.

5.Slide the switch to the OFF position to turn off the HM-70. (Make sure the power indicator light is off.)

850iR User Manual 16
Page 20
Image 20
LightSpeed Technologies 850iR OPERATING THE OPTIONAL HM-70HANDHELD MIC, 8 5 0 i R U s e r M a n u a l, On Off Mute