SEL Menu
The SEL menu is a simplified menu that can be called up by pressing the [SEL] button while an image is displayed. The following items can be set with use of the SEL menu.
•Image level [BRIGHTNESS]: Adjusts the brightness (ELC, gain (AUTO), and the convergence level of elec- tronic sensitivity enhancement (AUTO)).
•Red level
•Blue level
•Edge enhancement level
•Electronic zoom [ZOOM]: Adjusts the zoom factor.
•Detection area [AREA]: Specifies the detection areas of ELC, gain (AUTO), and electronic sensitivity enhance- ment (AUTO).
■How to display or operate the SEL menu
zPress the [SEL] button.
→The SEL menu appears.
x Press the [SEL] button to call up the screen of the item to be changed.
c Use of the [e] or [f] button allows users to adjust the setting.
Notes:
•Pressing the [SEL] button displays the last displayed item while the power is supplied.
•No operation for more than 3 seconds also terminates the SEL menu.
■Button assignment
Only pressing the [e] or [f] button allows users to assign the settings in the SEL menu while an image is displayed.
How to assign settings
z Call up the screen of the setting to be assigned in the SEL menu to a button.
x Hold down both of the [SEL] and [FREEZE (MENU)] buttons simultaneously while the screen is displayed until the displayed contents disappear.
c Use the [e] or [f] button to display and assign the settings to be stored.
Note:
•If "ZOOM" is assigned to a button, zoom can be adjust- ed in the image freezing state (☞ page 24).
25
