■ Basic operations | v To return to the camera image screen after storing the | |
The description below explains how to operate the SETUP | settings, move the cursor to "END" and press the [SEL] | |
button. | ||
menu basically. | ||
The settings can be stored even if the power of the | ||
First of all, the explanation provides how to display the | ||
CCU is turned off. | ||
SETUP menu on the connected monitor used for adjust- | ||
| ||
ment. |
|
Important:
•The following functions are not available when the cam- era head is not connected.
•Startup of white balance AWC
•MATRIX
•ELECTRIC ZOOM
•FREEZE
Top screen of SETUP menu
** SET UP ** | P | 1 |
| |||
CAMERA ID | *OFF | |||||
ELC | *OFF | |||||
SHUTTER | OFF | |||||
GAIN | OFF | |||||
SENS UP | OFF | |||||
OUTPUT SEL | RGB(NOR) | |||||
END |
|
|
|
|
|
|
** SET UP ** | P |
|
| |||
2 | ||||||
SCENE FILE | *FILE1 | |||||
WHITE BAL | AWC |
|
|
|
|
|
BLACK BAL | *MANU | |||||
SYNC | INT |
|
|
|
|
|
ELECTRIC ZOOM | ON |
|
|
|
|
|
FREEZE | ON |
|
|
|
|
|
END
z Hold down the [FREEZE (MENU)] button for approx. 2 seconds.
→The top screen of the SETUP menu appears.
xThe SETUP menu consists of 2 pages.
To change the page, move the cursor to "P1" or "P2" and press the [e] or [f] button.
Note:
•The cursor is a blinking part.
cPerform the settings for each item.
•Selection of setting item:
Press the [g] button or the [h] button to move the cursor.
•Change of settings:
Press the [e] button or the [f] button.
•Display of advanced setup screen:
Press the [SEL] button when "*" is attached to the target setting item.
•Return to previous setup screen:
Move the cursor to "RET" and press the [SEL] but- ton.
16
