Panasonic GP-US932CUE Chroma Gain Adjusts chroma gain, Total PED Adjusts the pedestal level

USER (default),B-Mg, Mg, Mg-R, R, R-Ye, Ye, Ye-G, G, G-Cy, Cy, Cy-B, and B

cPress the [SEL] button after axis selection.

→The "MATRIX" screen appears.

v To perform fine tuning, use the [e] or [f] button to adjust "GAIN" (chroma) and "PHASE" (hue).

When the color axis is unclear

When "USER AREA" is selected on the "MATRIX" screen, the axis is automatically displayed by selecting a color on the screen.

Color selection is performed on the color detection screen. The white rectangle cursor is blinking to select a target color on the color detection screen.

<Color matrix splitting chart>

Color detection screen

R-Ye

Cursor (Blinking)

*This chart is a guideline for displaying the closest axis at adjustment.

R	Mg-R
R-Ye	Mg
Ye	B-Mg
Ye-G	B

GCy-B

G-Cy Cy

zPoint the camera at the center of the photographic sub- ject with which the color is detected.

If the camera is immovable, move the rectangle cursor to the area with a target color with use of the [g], [h], [e], and [f] buttons.

Note:

• Every time the [SEL] button is pressed, the size of the rectangle cursor changes in the order of large → medi- um → small.

Select a size to meet the photographic subject size.

xHold down the [MENU] button for more than 2 seconds.

→The "MATRIX" screen appears again.

c To perform fine tuning, adjust "GAIN" (chroma) and "PHASE" (hue).

For example, the adjustment of "PHASE" or "GAIN" of "R/R-Ye" on the following screen provides the simultane- ous adjustment of "PHASE" or "GAIN" of the adjacent axes "R" and "R-Ye" in "Color matrix splitting chart".

** MATRIX ** USER

R/R-Ye PHASE –........+

R PHASE	–........+
R-Ye PHASE	–........+
R/R-Ye GAIN	–........+
R GAIN	–........+
R-Ye GAIN	–........+
USER AREA	*
RET END

Note:

•When the color on the axis in the color matrix splitting chart is detected, the adjacent axes are not displayed.

[CHROMA GAIN] Adjusts chroma gain.

Be sure to view a vector scope or a color video monitor when the chroma gain is adjusted with use of the [e] or [f] button.

When the level indicator moves in the "+" direction, the chroma level becomes higher. When the level indicator moves in the "–" direction, the chroma level becomes lower.

[TOTAL PED] Adjusts the pedestal level.

Be sure to view a waveform monitor or a color video monitor when the pedestal level is adjusted with use of the [e] or [f] button.

When the level indicator moves in the "+" direction, the image becomes brighter. When the level indicator moves in the "–" direction, the image becomes darker.

22