Panasonic GP-US932CUS, GP-US932CUE DC power connector DC 12V, 9RS-232C port RS-232C

!812 V DC power connector [DC 12V IN]

This connector is used to connect an external DC power supply of 12 volts (2 A or more).

Important:

•A class 2 power supply of 12 V DC (10.8 to 13.2 volts) shall be used.

@2SDI output connector [SDI]

(* only for GP-US932CUS, GP-US932CUSE)

This connector provides HD-SDI or SD-SDI output sig- nals.

Important:

•Please use a high quality cable compatible with HD-SDI.

Compatible connector HR10A-7P-4S (73) manufac- tured by HIROSE ELECTRIC CO., LTD. (as of October 2007)

!9RS-232C port [RS-232C]

Pin arrangement of applicable connector

14

23

(Cable side)

This port is used to perform external control. Please contact your dealer for further information.

(D-sub 9-pin connector,		Pin number	Signal
	female)	1	GND
5	1	2	TXD
		3	RXD
		4	DSR
		5	GND
9	6	6	DTR
		7	CTS
		8	RTS
		9	GND

@0S-video output connector [S-VIDEO]

This connector provides the luminance signal (Y) output and color signal (C) output with synchronizing signals.

@1RGB/YPbPr connector [RGB/YPbPr]

This connector provides the RGB signal (red, green, and blue) output or the YPbPr signal (luminance, color difference B, and color difference R) output. The output signal can be set up with use of "OUTPUT SEL" in the SETUP menu. (☞ page 19)

(D-sub 9-pin connector,		Pin number	Output signal
		1	GND
	male)
		2	GND
1	5
		3	R, Pr
		4	G, Y
		5	B, Pb
		6	VIDEO
6	9	7	SYNC
		8	GND
		9	GND

12