Panasonic GP-US932CUS Knee Adjusts the knee point, White Clip Adjusts the white clip level

Important:

•In the case of the following, "---" appears and gamma adjustment is not available.

•When "BLACK STRETCH" is set to "ON"

•When "D-RANGE" is set to "EXPAND"

[KNEE] Adjusts the knee point.

Be sure to view a waveform monitor or a color video monitor when the knee point adjustment is performed.

The knee point adjustment is selectable from the following. MANU (default): The knee point is manually adjusted. AUTO: The knee point is automatically adjusted.

When "MANU" is selected, follow the steps below to adjust the knee point.

zSelect "MANU" and press the [SEL] button.

→The "KNEE MANU" screen appears.

xAdjust the knee point with use of the [e] or [f] button.

Important:

•When "D-RANGE" is set to "EXPAND", the knee point adjustment is disabled.

"KNEE MANU" screen

** KNEE	MANU **
KNEE POINT	–	........+

RET END

[BLACK STRETCH] Toggles the black stretch function on and off.

Selection "ON" or "OFF" (default) determines whether or not to perform the black stretch function.

When "ON" is selected, black crushing is corrected at low illuminance to make an image more viewable.

Important:

•When "D-RANGE" is set to "EXPAND", the black stretch setting is disabled.

[D-RANGE] Toggles the dynamic range between NORMAL and EXPAND.

The dynamic range is set to "NORMAL" (default) or "EXPAND".

Selection of “EXPAND” makes high contrast images more viewable.

[WHITE CLIP] Adjusts the white clip level.

Be sure to view a waveform monitor or a color video monitor when the white clip level is adjusted with use of the [e] or [f] button.

When the level indicator moves in the "+" direction, the level becomes higher. When the level indicator moves in the "–" direction, the level becomes lower.

Important:

•When "D-RANGE" is set to "EXPAND", the white clip adjustment is disabled.

[FLARE COMP] Performs flare compensation.

Selection "ON" or "OFF" (default) determines whether or not to perform the flare compensation.

When "ON" is selected, flare is reduced.

[DNR] Specifies the level of the digital noise reduction function.

The digital noise reduction function reduces noise. The effect level is selectable from the following.

LOW (default): The low level of digital noise reduction is performed. (smaller residual image)

HIGH: The high level of digital noise reduction is per- formed. (larger residual image)

OFF: The digital noise reduction function is disabled.

[MATRIX] Adjusts the hue.

Be sure to view a vector scope or a color video monitor when the hue adjustment is performed.

"SCENE FILE" screen

** SCENE FILE 1 ** P2

FLARE COMP		OFF
DNR		LOW
MATRIX		*USER	...+
CHROMA GAIN	–	.....
TOTAL PED	–........+
RET END

"MATRIX" screen

**MATRIX ** USER

B PHASE —........+

B GAIN —........+

USER AREA *

RET END

z Display your target color in the screen center as large as possible.

x Select the axis close to your target color using "MATRIX" on the "SCENE FILE" screen. The axis is selectable from the following.

21