Troubleshooting
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below.
Symptom
No image displayed
Camera with no response to the button operation on the front face of the CCU
The lighting LED of the [SCENE] button unchanged
The lighting LED of the [GAIN] button unchanged
Only the color bar displayed
The hue [MATRIX] unad- justable in the menu
Cause/solution
•Are the cables appropriately connected to the video output connector,
Check whether each cable is appropriately connected.
•Is the monitor luminance appropriately adjusted, or is the contrast appropriately adjusted?
Check whether the monitor settings are appropriate.
•Is the function setup switch No. 4 set to "ON"? Set the function setup switch No. 4 to "ON".
•Pressing once displays the state.
Press the [SCENE] button repeatedly until your target LED lights.
•Pressing once displays the state.
Press the [GAIN] button repeatedly until your target LED lights.
•Is the camera cable appropriately connected at both the connector of the CCU and the connector of the camera head?
Check whether the connection is appropriately established.
•Is the camera cable appropriately connected at both the connector of the CCU and the connector of the camera head?
Connection between the camera head and camera cable is required to adjust the image quality.
Check whether the connection is appropriately established.
Reference
pages
11, 12
—
11
9
9
9
9
26
