Grizzly instruction manual Greasing, G0503 Grease SCHEDULE/CHECK-OFF Chart

Greasing
Tools Needed	Qty
Grease Gun	1
Hardware Needed	Qty
High Temp Bearing Grease	Varies
Multi-Purpose Grease	Varies

Wipe grease fittings clean and lubricate with two pumps of high-temp bearing grease. To lubricate a greased surface; wipe the surface clean and apply a thin coating of multi-purpose grease.

The photos in Figure 47 label the grease fit- tings and greased surfaces by number for easy identification. Match the numbers in Figure 47 to the chart below for proper greasing intervals. Note—This page was designed to be copied and used as a check-off chart to help maintain a regu- lar lubrication schedule.

	3
			4
	1	2
		10	6
5	7
	8	9

Figure 47. Lubrication points.

G0503 GREASE SCHEDULE/CHECK-OFF CHART

	(see fig. 47 for
	fitting locations)
Main Wheels	1,2
Blade Tension Slide	3,
conveyor	4,5,6
Elevation Shaft	7,8
Elevation Gear	9
Tension Handle	10

-36- Model G0503 (Mfg. Since 12/08)