F
G
H
J
I
K
L
M
N
Q
P
O
Figure 2. Back and side views of machine features and controls.
F.Main Motor—Drives the saw wheels for blade movement and drives the hydraulic pump for conveyor movement.
G.Hydraulic System Oil Cooler—Cools the hydraulic fluid for the hydraulic system.
H.Hydraulic Fluid Filter—Removes contami- nating particles from the hydraulic fluid.
I.Hydraulic Tank—Holds and cools the hydraulic fluid.
J.Hydraulic Pump—Creates hydraulic oil flow which drives the conveyor motor.
K.Hydraulic Conveyor Motor—Utilizes the hydraulic fluid flow from the hydraulic pump drive motor to move the conveyor belt.
L.Head Elevation Handwheel—Moves the head (the part of the saw that contains the wheels and blade) up or down as needed.
M.Electrical Control Box—Main area for wir- ing, rewiring, and changing the fuses. Should never be opened when the machine is con- nected to the power source!
N.Blade Elevation Gauge—Shows the blade height.
O.Blade Tensioner—Provides a mechanical means for properly tightening the blade.
P.4" Dust Port—Connection point for a dust collection system.
Q.Conveyor Belt Controls—Controls ON/ OFF and conveyor speed.
Model G0503 (Mfg. Since 12/08) |
