Grizzly G0503 instruction manual Operations, Operation Safety, Stock Preparation

SECTION 4: OPERATIONS

Operation Safety

Eyes, lung, and ear damage could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.

Loose hair and cloth-

ing could get caught in

machinery and cause seri-

ous personal injury. Keep

loose clothing and long

hair away from moving machinery.

NOTICE

If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, trade maga- zines, or get formal training before using this machine. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training or knowledge.

Stock Preparation

Always make sure that any stock you plan on cut- ting is clean and free of nails, staples, or embed- ded stones.

Keep in mind that precision cuts require a more extended preparation process than rough cuts.

To prepare the workpiece for a precision cut:

1.Surface plane the workpiece on a joint- er—The concave face of the workpiece should be planed flat on a jointer.

2.Surface plane the workpiece on a thick- ness planer—The opposite face of the workpiece should be planed flat with a thick- ness planer.

3.Edge joint the workpiece on a jointer—

The concave edge (viewed from end-to-end) of the workpiece should be edge jointed flat on a jointer. This flat edge will glide along the fence rollers during the resaw operation.

Model G0503 (Mfg. Since 12/08) -27-