LightSpeed Technologies 850iR Ir Sensor Installation, Suspended Ceiling Mount, 8 5 0 i R, U s e r

8 5 0 i R U s e r M a n u a l

IR SENSOR INSTALLATION

Suspended Ceiling Mount

1.Lift the ceiling tile nearest the grid rail in your desired sensor location. Guide one side of the C-clip over one edge of the grid rail. Providing firm support to the back of the grid rail with one hand (to prevent bending), firmly and carefully snap the second side of the C-clip over the edge of the rail.

2.Uncoil sensor wire. Connect one end of the sensor cable to the plug on the sensor. Loosely secure wire overhead and route it back to the 850iR.

3.Connect the other end of the sensor cable into one of the sensor inputs on the back of the 850iR.

Wall/Solid Ceiling Mount

wall

mounting

strip

c-clip

sensor jack

1.Screw the plastic mounting strip to a place high on the wall or in the middle of the solid ceiling. Mount the strip horizon- tally as shown above.

2.Firmly snap the C-clip on the back of the IR sensor onto the plastic mounting strip with the sensor plug hanging down (if a wall mount) or toward the receiver location (if ceiling mount).

3.Uncoil the sensor wire. Screw one end of the sensor cable to the plug on the sensor. Route the wire back to the 850iR, securing it along the way.

4.Connect the other end of the sensor cable to one of the sensor inputs on the back of the 850iR.

Speaker Installation

1.Locate the speaker installation instructions packed with your speaker(s).

2.	Follow instructions and mount	Speaker Install
		Instructions
	speaker(s).
3.	Return to this manual to complete
	the set up of your system.
		850iR User Manual 4