10.Install finger in the oven by sliding it over the plenum flange and setting the front bracket. BE SURE THAT THE FINGER SETS SQUARELY OVER THE PLENUM FLANGES AND THE HOLES POINT IN THE PROPER DIRECTION. Top fingers point down, bottom fingers point up.
12.Attach Motor Cover as shown with bolts provided.
11.Repeat step 10 until all eight (8) fingers are installed.
Install conveyor and crumb pans before operation. See page 17 for conveyor installation instructions.
NOTE: Prior to inserting into the oven opening, slide the conveyor
IMPINGER® FINGER COLUMNATING PLATES
12 | Impinger I – 1000 Series Ops Manual |