Lincoln Electric 225 manual Field Installed Options

C-3 ACCESSORIES C-3

FIELD INSTALLED OPTIONS

The following Options/Accessories are available for the Precision TIG 225:

•K2348-1 Under-Storage Cart

Includes a front magnetic latch storage drawer and rear storage bin on a single bottle undercarriage. (L12225 Installation Instructions included)

•K870 Foot Amptrol

Single pedal foot activation of arc start switch and output control, with 25 ft.(7.6m) plug cable.

•K963-3 Hand Amptrol

Fastens to torch for convenient thumb activation of arc start switch and output control, with 25 ft.(7.6m) plug cable:

•K814 Arc Start Switch

Needed for TIG welding without an Amptrol. Includes 25 ft.(7.6m) plug cable, and attaches to torch for convenient finger control.

•TIG-Mate Torch Starter Kits:

Includes Torch with Twist-Mate adapter and acces- sories listed below:

K2266-1 TIG-Mate Torch Starter Kit Includes:

•150A PTA-17 12.5 ft.(3.8m) Torch

•KP508 Parts Kit

•Regulator & Hose

•K1622-1 Twist Mate Torch Adapter

•Work Cable & Clamp (Not required for Precision TIG 225)

K2267-1 TIG-Mate 20 Torch Starter Kit Includes:

•200A PTW-20 12.5 ft.(3.8m) Torch

•KP510 Parts Kit

•Regulator & Hose

•K1622-4 Twist Mate Torch Adapter

•Water Hose & Hose Coupler

•Work Cable & Clamp

(Not required for Precision TIG 225)

•Magnum “Pro-Torch™ TIG Torch” assemblies and Accessories.

Requires Twist-Mate Adapter: K1622-1 for PTA-9/-17 K1622-3 for PTA-26

K1622-4 for PTW water cooled torch

•Harris #3100211 Harris Argon Flow Regulator (Includes 10 ft.(3.1m) hose.)

•K2374-1 Electrode Holder and Cable

200 amp Electrode Holder with 10 ft.(3.1m) cable and Twist-Mate connector.

PRECISION TIG 225