Lincoln Electric 500 manual Welding Capability, For Auxiliary Power, Other Features

B-2 OPERATION B-2

•Dual 3-digit output meters are provided (optional on K1639-1) for presetting the weld amperage or voltage and displaying the actual amperage and voltage during

welding. The meters use superbrite L.E.D.'s for improved readability in full sunlight.

LOOK-BACK FEATURE: After welding has stopped, both displays will remain on for 7 seconds with the last current and voltage value displayed. During this time, the left-most decimal point in each display will be

FLASHING.

•Standard remote control capability with 14 pin and 6 pin connectors for easy connection of Lincoln remote con- trol accessories.

•An internal "Solid State" contactor allows for the selec- tion of "hot" or "cold" output terminals with a toggle switch on the control panel.

•“Arc Control”potentiometer in Wire and Stick modes for precise adjustment of arc characteristics.

•Advanced circuitry to prevent pop-outs in the five slope modes.

FOR AUXILIARY POWER

•12,000 watts of 120/240 VAC, 60Hz auxiliary power.

•Power for tools, 120/240 VAC lights, electric pumps and for standby emergency power.

•Drive a 5 HP motor (provided it is started under no load).

•Two 20 amp 120 VAC duplex receptacles for up to 40 amps of 120 VAC power.

•One 50 amp, 120/240 VAC dual voltage receptacle for up to 50 amps of 240 VAC, and up to 50 amps per side to separate branch circuits (not in parallel) of 120 VAC single phase auxiliary power. Allows easy con- nection to premises wiring.

•Weld and AC auxiliary power at the same time (with- in machine total capacity).

OTHER FEATURES

•Deutz 3-cylinder, air/oil cooled diesel engine. Designed for long life, easy maintenance and excel- lent fuel economy.

•Engine protection system shuts the engine down for low oil pressure, high oil temperature or a broken fan/engine alternator belt.

•Gauges for oil pressure, oil temperature, engine alter- nator output and fuel level (on K1639-2 only codes above 10838 have a fuel level gauge on both K1639-

1and K1639-2).

•Indicator lights for low oil pressure, high oil tempera- ture, engine alternator low output/broken belt and low fuel level (on K1639-2 only for codes 10838 and below).

•Automatic low fuel shutdown before running out of fuel (K1639-2 only for codes 10838 and below).

•Engine hour meter standard on all models.

•Extended range 25 gallon (94.6 l) fuel tank.

•Automatic idler reduces engine speed when not weld- ing or drawing auxiliary power. This feature reduces fuel consumption and extends engine life.

•Compact size fits crosswise in full size pick-up truck.

•Single side engine service.

•Copper alternator windings and high temperature insulation for dependability and long life.

•New paint system on case and base for outstanding corrosion protection.

K1639-1 Commander 500 Standard Model

•The K1639-1 is the standard version of the Commander 500, and has all the features of the K1639-2 Deluxe version except there is no oil pres- sure gauge, oil temperature gauge, engine alternator gauge, nor dual output meters (codes 10838 and below do not have a fuel level gauge nor low fuel light). This version does have fully functional engine protection for low oil pressure, high oil temperature, and alternator output with associated lights.

•A field installed Dual Output Meter and Gauge Kit (K1768-1) is available for the K1639-1 Commander 500.The kit includes dual output meters, oil pressure gauge, oil temperature gage, and alternator ammeter.

WELDING CAPABILITY

The Commander 500 is rated at 500 amps, 40 VDC at 100% duty cycle and 575 amps, 36 VDC at 50% duty cycle. The maximum open circuit voltage at 1900 RPM is 80 volts. The weld current is variable from 30 to 575 amps.

COMMANDER 500