Lincoln Electric IM10019 manual Diagrams, Electric Shock Can Kill

F-1 DIAGRAMS F-1

INSTRUCTIONS FOR INSTALLING A 2-POLE RESIDUAL CURRENT DEVICE

TO PROTECT THE 240V SINGLE PHASE RECEPTACLE

WARNING

ELECTRIC

SHOCK

CAN KILL

Do not operate with covers removed

Disconnect input power before servicing

Do not touch electrically live parts

Only qualified persons should install, use or service this equipment

1.TURN OFF THE ENGINE AND DISCONNECT THE NEGATIVE BATTERY CABLE.

2.REMOVE THE SCREWS THAT SECURE THE LOWER CONTROL PANEL AND OPEN THE PANEL.

3.WHILE HOLDING THE RCD MOUNTING BRACKET REMOVE THE TWO SCREWS SECURING THE COVER PLATE AND RCD MOUNTING BRACKET. SET THE RCD MOUNTING BRACKET AND SCREWS ASIDE AND DISCARD COVERPLATE.

(SEE FIGURE 1).

LOWER CONTROL

PANEL

RCD MOUNTING

BRACKET

COVER PLATE

FIGURE 1

A

M22253

BIG RED™ 600