A-3

INSTALLATION

A-3

 

 

 

CAbLE CONNECTIONS

There is one circular connector for the gun trigger on the front of the LN™-25 PIPE.

Function

Pin

Wiring

 

 

 

5-pin trigger

A

5 volt supply

connector for

B

Not used

push-guns

C

Trigger

only.

D

83% WFS switch

 

E

5 volt supply

 

 

 

CB D E A

SHIELDING GAS CONNECTION

WARNING

CYLINDER may explode if damaged.

• Keep cylinder upright and chained to support.

•Keep cylinder away from areas where it may be damaged.

•Never lift welder with cylinder attached.

•Never allow welding electrode to touch cylinder.

•Keep cylinder away from welding or other live electrical circuits.

•bUILD UP OF SHIELDING GAS MAY HARM HEALTH OR KILL.

• Shut off shielding gas supply when not in use.

•See American National Standard z-49.1, "Safety in Welding and Cutting” Published by the American Welding Society.

------------------------------------------------------------------------

Maximum inlet pressure is 100 psi. (6.9 bar.)

Install the shielding gas supply as follows:

1.Secure the cylinder to prevent it from falling.

2.Remove the cylinder cap. Inspect the cylinder valves and regulator for damaged threads, dirt, dust, oil or grease. Remove dust and dirt with a clean cloth. DO

NOT ATTACH THE REGULATOR IF OIL, GREASE OR DAMAGE IS PRESENT! Inform your gas supplier of this condition. Oil or grease in the presence of high pressure oxygen is explosive.

3.Stand to one side away from the outlet and open the cylinder valve for an instant. This blows away any dust or dirt which may have accumulated in the valve out- let.

4.Attach the flow regulator to the cylinder valve and tighten the union nut(s) securely with a wrench. Note:

if connecting to 100% CO2 cylinder, insert regulator adapter between regulator and cylinder valve. If adapter is equipped with a plastic washer, be sure it is seated for connection to the CO2 cylinder.

5.Attach one end of the inlet hose to the outlet fitting of the flow regulator. Attach the other end to the welding system shielding gas inlet. Tighten the union nuts with a wrench.

6.Before opening the cylinder valve, turn the regulator adjusting knob counterclockwise until the adjusting spring pressure is released.

7.Standing to one side, open the cylinder valve slowly a fraction of a turn. When the cylinder pressure gage stops moving, open the valve fully.

8.The flow regulator is adjustable. Adjust it to the flow rate recommended for the procedure and process being used before making a weld.

LN™-25 PIPE

Page 11 Page 13
Page 12
Image 12
Lincoln Electric IM10056 manual CAbLE Connections, Shielding GAS Connection, Function Pin Wiring
Page 11 Page 13

IM10056 specifications

The Lincoln Electric IM10056 is a versatile and powerful electric welder designed for professionals and DIY enthusiasts alike. Known for its robust construction and user-friendly features, the IM10056 stands out in the welding equipment market. This welder is ideal for a variety of applications, including fabrication, repair, and maintenance tasks, making it a popular choice for both commercial and home workshops.

One of the key features of the Lincoln Electric IM10056 is its impressive power output. The machine is equipped with a high-performance inverter technology that provides a stable arc, allowing for smooth and consistent welds even on thin materials. This inverter technology also contributes to energy efficiency, reducing operational costs while maintaining high performance standards.

The IM10056 offers a wide range of welding capabilities, supporting different processes such as MIG, TIG, and stick welding. This multi-process functionality allows users to switch between welding techniques easily, making it an incredibly adaptable machine for various projects. The intuitive controls and digital display simplify the setup process, enabling welders to quickly adjust settings for optimal performance.

Another notable characteristic of the Lincoln Electric IM10056 is its portability. Weighing in at a manageable level, this welder can be easily transported to job sites or stored away when not in use. Its compact design does not compromise functionality; it still delivers robust performance in tight spaces.

Safety features are also a primary consideration in the design of the IM10056. The welder includes an integrated cooling system to prevent overheating, which enhances durability and extends the machine’s lifespan. Additionally, it comes with protection against overload, ensuring that users can operate the device confidently without the risk of damage.

Moreover, maintenance is made easy with the Lincoln Electric IM10056. Regular service requirements are minimized due to its reliable construction and technological advancements, making it an ideal choice for users who want a durable and long-lasting tool.

In summary, the Lincoln Electric IM10056 is a well-rounded, feature-rich welding machine that combines power, efficiency, and versatility. With its advanced technologies, multi-process capabilities, user-friendly interface, and safety features, it is a leading choice for anyone looking to tackle their welding projects with precision and confidence. Whether for professional or personal use, the IM10056 delivers exceptional performance that meets the demands of modern welding applications.
Top Page Image Contents