Lincoln Electric IM311-E manual Accessories, Optional Equipment, GUN and Cable Assemblies

C-1		ACCESSORIES			C-1
OPTIONAL EQUIPMENT
GUN AND CABLE ASSEMBLIES
Type	K-355-10*	K-345-10*	K-264-8	K-361-10	K-406*
Length:	10 feet	10 feet	8 feet	10 feet	Linconditioner Gun 10 ft.
					(15 ft. Exhaust Hose)
Rated Welding
Current:	250 Amps	350 Amps	250 Amps	350 Amps	350 Amps
Duty Cycle	60%	60%	60%	60%	60%
Electrode Sizes	.068, .072, 5/64	.068, .072, 5/64	068, .072, 5/64	068, .072, 5/64	068, .072, 5/64
Reduced Speed
Switch	Std.	Std.	None	None	Std.
Sizes	5/64	5/64	5/64	5/64	5/64
Nozzle Angle	90E	90E	62E	62E	68E
Weight	7.0 lbs.	89.3 lbs.	5.2 lbs.	7.5 lbs.	16.0 lbs.

* Recommended for pipe welding applications.

All guns include one each .068/.072 tip, 5/64 tip, and a thread protector**. The K-264-8 also includes an insulated guide for 3/4" to 1-1/2" stickout. The K-361-10 also includes an insulated guide for 2" stickout.** The K-406 includes an insulated guide for 2" to 1" stickout, but no thread protector.

K350 ADAPTER KIT

Required when using the LN™-23P on any constant voltage power source. Either one or two LN™-23P’s can be connected to the Adapter. If two LN™-23P’s are connected, they can be set for different proce- dures. The Adapter circuit is interlocked so only one LN™-23P can be used at a time.

K350-1Adapter Kit

The K350-1 is similar to the K350 but has a 14 pin connector on the end of the control cable that will interface with any Lincoln power source that utilizes a 14 pin connector for control.

Note: An Adapter Kit is not required when connecting a LN™-23P / K316L-2 (8pin connector) to a V350-Pipe, V350PRO or V450PRO.

K-276 ENCLOSED WIRE REEL SUPPORT

Bolts to the LN™-23P frame for feeding wire from standard 50 lb. Innershield coils. Includes enclosure and door to keep the dirt out; also includes wire reel brake assembly.

LN™-23P