|
| TROUBLESHOOTING & REPAIR |
|
| ||||
|
|
|
|
|
| |||
|
| Observe all Safety Guidelines detailed throughout this manual |
| |||||
|
|
|
|
|
| |||
| PROBLEMS |
| POSSIBLE AREAS OF | RECOMMENDED |
| |||
| (SYMPTOMS) |
| MISADJUSTMENT(S) | COURSE OF ACTION |
| |||
|
|
|
|
|
|
|
|
|
OUTPUT PROBLEMS
No output - Main input fuses open, indicating excessive current draw.
1.Inspect input leads for possible shorts or grounds or
2.Install new fuses and reapply power. If fuses open again, con- sult a Lincoln Authorized Field Service Facility.
The machine operates normally | 1. Check the input voltage and input |
when connected for 200 - 230VAC | voltage reconnect procedures. |
input. There is no output when the | See Installation Section of this |
machine is connected to 380VAC or | manual. |
higher. |
|
If all recommended possible areas of misadjustment have been checked and the problem persists, Contact your local Lincoln Authorized Field Service Facility.
CAUTION
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, con- tact your local authorized field service facility for technical troubleshooting assistance before you proceed.
