5 |
| INSTALLATION | 5 |
|
|
|
|
REMOTE CONTROL CONNECTION |
|
| |
A remote control receptacle is provided on the case front of the welder for connecting a remote control to to the machine. Refer to the Optional Accessories section of this manual for other available remote controls.
CONNECTIONS FOR STICK (SMAW)
WELDING
STICK ELECTRODE CABLE AND WORK CABLE
CONNECTION
Refer to Included Equipment in the Operation Section of this manual for STICK welding equipment which is included with the Square Wave TIG 175.
An electrode holder with cable is supplied with the
Square Wave TIG 175. Turn the Power Switch “OFF”.
Connect the Twistmate plug into the Electrode/Gas
Output Receptacle and turn it clockwise until it is tight.
The work cable and work clamp are factory connected.
