Lincoln Electric IM794 manual Accessories, 1. K549-1 .035 0.9 mm Innershield Welding Kit, SP-170T

C-1 ACCESSORIES C-1

OPTIONAL ACCESSORIES

1.K549-1 .035" (0.9 mm) Innershield® Welding Kit

— Includes a contact tip, a gasless nozzle and a

.030/.035" (.8/.9 mm) cable liner to permit the Magnum™ 100L gun and cable to use .035" (0.9 mm) diameter flux-cored electrode. The fitting on the end of the liner is stenciled with the maximum rated wire size (.045"/1.2 mm). Also included is a 10 lb.(4.5 kg.) spool of .035" (0.9 mm) Innershield® NR-211-MP.

See “Innershield (FCAW) Conversion” in this sec- tion for installation instructions and MAINTE- NANCE section for proper feeding component con- figuration and installation.

2.K549-2 .045" (1.2 mm) Innershield® Welding Kit

— Includes a contact tip, a gasless nozzle and a

.035/.045" (0.9/1.2 mm) cable liner to permit the Magnum™ 100L gun and cable to use .045" (1.2 mm) diameter flux-cored electrode. The fitting on the end of the liner is stenciled with the maximum rated wire size (.045"/1.2 mm). Also included is a 10 lb.(4.5 kg.) spool of .045" (1.2 mm) Innershield® NR-211-MP and a knurled drive roll.

See “Innershield (FCAW) Conversion” in this sec- tion for installation instructions and MAINTE- NANCE section for proper feeding component con- figuration and installation.

3.K664-2 Aluminum Feeding Kit — This kit is rec- ommended for welding with .035 Aluminum wire. Included with this kit are a drive roll, cable liner and

.035 contact tip. It is important when changing between welding with steel wire and aluminum to exchange feeding components due to the lubricant applied to steel wire. Failure to do so may result in contaminated welds when welding aluminum.

See Maintenance section for instructions on installing drive roll, cable liner, contact tip and their proper configuration.

4.KP665-045C Drive Roll – Optional — Knurled drive roll for feeding .035 - .045” (0.9 - 1.2 mm) diameter flux-cored electrode.

5.K520 Utility Cart — Designed to transport the Lincoln family of small welders. Has provisions for mounting a single gas cylinder. Has front casters and large rear wheels. Handle height is easily adjustable. Bottom tray provided for tools and accessories. Easy assembly required; takes less than 15 minutes.

6.K586-1 Deluxe Adjustable Gas Regulator & Hose Kit

Accommodates CO2 , Argon or Argon-blend gas cylinders. Includes a cylinder pressure gauge and

4.3 ft. (1.3m) gas hose.

7.K697-2 Power Cord Extension — Extension 230V power cord (20’/6.1m) allows extra convenience when work is located some distance away from power receptacle.

8.K667-1 230 Volt 50 Amp Receptacle — For pro- viding power for your SP-170T at your welding loca- tion. NEMA standard 6-50 R receptacle. See “Line Cord Connection” in INSTALLATION section for recommended wire size.

(1)This regulator comes standard with a 4.5 foot hose with the SP-170T.

SP-170T