Lincoln Electric 11079, IM831 manual Recommended Equipment, Stick, Wire Feed, Tig

C-2 ACCESSORIES C-2

RECOMMENDED EQUIPMENT

STICK

K704 Accessory Kit which includes:

•Electrode Holder & Cable

•Work Clamp & Cable

•Headshield

WIRE FEED

LN-25

K449 LN-25 - Includes internal contactor for across the arc operation (no control cable). Provides “cold” electrode until gun trigger is pressed. Includes gas solenoid. Requires Drive Roll Kit and Weld Power Cable.

Magnum Gun and Magnum Gun Connector Kit are required for gas-shielded welding. Innershield Gun is required for gasless welding.

LN-15

K449 LN-15 - Includes internal contactor for across the arc operation (no control cable). Provides “cold” electrode until gun trigger is pressed. Includes gas solenoid. Requires Drive Roll Kit and Weld Power Cable.

Magnum Gun and Magnum Gun Connector Kit are required for gas-shielded welding. Magnum Innershield Gun and wire bushing is required for gas- less welding.

TIG

Magnum™ TIG Torch

•K 26V 2 Cable Pro Torch

Magnum Parts Kit and Argon Gas

•K509 Parts Kit

K930-2 TIG Module (Requires)

•Requires K938-1 Contactor Kit,

•K936-4 Control Cable, and

•K814 Arc Start Switch

Optional TIG Module Accessory:

•K939-1 Docking Kit

•K937-45 Control Cable Extensions (45ft.)

•K844-1 Water Valve Kit

RANGER 3 PHASE